| Model
115HYD Hydraulic Traverse Coil Winder |
|
|
|
|
|
|
|
|
|
|
|
 |
|
Model
115HYD
The Model 115HYD layer coil winder incorporates an hydraulic valve
fed from a high pressure separate pump unit forming part of the
basic machine equipment. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Traverse
Hydraulic Valve
The traverse hydraulic valve is such that pressure from the wire
guide is sensed by it so that the traverse is then corrected to
follow either the previous wire turn or to totally reverse direction
due to striking a bobbin flange or air cored coil tooling. |
|
|
|
|
| Technical
Data |
| Spindle
Speed: |
|
0-8,000 RPM |
| Wire
Size: |
|
30 AWG- 0.1" (0.25mm)
to 18 AWG-0.4" (1.00mm) |
| Maximum
Coil Diameter: |
|
4" (102 mm) standard,
4.5" (114mm) optional |
| Tail
Stock: |
|
Max Open: 8.25" (21cm) |
| Wire
Guide Assembly: |
|
One Provided |
| Coil
Traverse Length: |
|
3.75" (95.25 mm) |
|
Dual Pulley Speed Set Up: |
|
For most suitable spindle
speeds |
|
Spindle Direction: |
|
Forward and Reverse |
|
Counter: |
|
Series 900 8 preset integral |
|
|
|
|
|
|
|
|
|
Model 115HYD
Hydraulic Traverse Coil Winder
Minimal setting is required involving only roller adjustment
on the tension pulleys. No traverse adjustment is normally needed
even when changing wire diameters.
|
|
|
|
|
|
|
|
|
|
|
|
Optional Accessories:
A range of Tensions and Dereelers is suitable for use with this
machine.
- Hysteresis
- Nylon Capstan Friction
- Special Purpose Tensions
- T-Bar Dereeling
- Small & Large Horizontal Dereelers
- Vertical Dereelers
|
|
|
|
|
|
|
|
|
|
|
|
